Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings) . 2. Press and hold the Bluetooth Pairing Button on the back of the unit for 2 seconds. The unit will beep and the Bluetooth icon will flash on the display, indicating the unit is in pairing mode.
Where is the Bluetooth button on iHome?
Turn on Bluetooth connectivity and make your device “discoverable”. 4) Press and hold the Play/Pause/Pairing Button located on top of the unit to put the iDM12 in pairing mode (release when the amber light on the iDM12 flashes and 2 beeps sound).
How do I turn off Bluetooth on my iHome?
7. When done listening, press the Power/Alarm Reset Button to turn the unit off. NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. 1.
How do I play music on my iHome alarm clock?
Connect one end of a standard stereo 3.5mm audio cable (not included) into the line-in jack on the back of your iHome and the other into the headphone or output jack of your audio device. Turn the device on and press play. Press the Power Button on the unit to turn it on.
How do I change the color on my iHome alarm clock?
Press the Presets Button to select an FM preset to wake to, or press the or Buttons to tune in a desired wake to station. Wake to Tone: Press the Alarm Button to confirm. Press the or Buttons to select the desired tone to wake to (Tone 1 -Tone 4).
Where is the reset button on my iHome speaker?
Resetting the Unit
If the unit is “frozen” or locks up, you may wish to reset it. To do so, turn the unit ON and press the end of paperclip or similar into the reset port on the back of the unit for less than 2 seconds to reset it without clearing Bluetooth settings. The unit will reset and power back on.
Why is my iHome not connecting to Bluetooth?
If your device does not auto-link when within range, re-pair the device. To do so, first delete this unit from your Bluetooth devices menu. Move the Power OFF/Bluetooth/Aux Switch on the unit to the Bluetooth position (center) to begin pairing. … Check your device’s manual for details on Bluetooth pairing and linking.
How do I set the time on my iHome idl45?
Press and hold “Clock Button” for 2 seconds. Press and release “Alarm 1 or 2 button” to select 12 or 24 hour display. Press clock button again (or no button within 10 seconds) and the settings are automatically saved.
How do I turn my iHome alarm off permanently?
How to Turn Off the Alarm on an iHome
- Set the correct time on the iHome clock. …
- Check the lower part of the clock display for the alarm time. …
- Press the alarm button once to activate the alarm review mode. …
- Press the alarm button once more during the alarm review mode to turn off the alarm.
How do I set the time on my iHome without the time button?
Press the “Sleep/Minute Set” button to adjust the minute time. If your unit does not contain these buttons, press the “Select UP/FF” or “Select Down/Rew” button until the correct time is displayed. Press the “Time Set” or “Clock Adjust” button again to confirm the clock time setting.