How do I change the WIFI password on my security camera?

How do I reconnect my camera to a new Wi-Fi?

Steps to reconnect your camera to an existing internet connection

  1. Hold down the WPS button on the back of the camera and release when the LED begins to flash white (about 6 seconds)
  2. Join the Alarm (XX:XX:XX) Wi-Fi network from your mobile phone or on your computer.
  3. Select language.
  4. Select Scan for Wi-Fi Networks.

How do I change my camera Wi-Fi password?

Select “Settings” button on the upper right corner of the app’s camera control page. 4. Tap “Wi-Fi settings” to change your Wi-Fi name and password. Then click save.

How do I reset my security camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I reset my Smart camera Wi-Fi?

Press and hold the Reset button located on the back side of the camera for 15 seconds, and then release the button. The camera will make a “click” sound and then the status LED will blink green, indicating the camera was reset.

IT IS INTERESTING:  Quick Answer: Does Bluetooth have to always be on for Fitbit?

How do I change the WiFi on my Iegeek camera?

How do you switch your ie gate camera to Wi-Fi? The simple approach is to initially set up your camera using the ethernet wired connection. Then via the hicam app select Wi-Fi and click switch. At which point the camera will disconnect from the wired ethernet and then reset.

Why does my WiFi camera keep disconnecting?

If the camera keeps disconnecting, maybe the WiFi signal is not so good. Please check your network enviroment: … 1: Check the WiFi antenna to make sure whether it is loose or not. 2: Check the camera and the WiFi Hotspot distance is not far and whether it is blocked by several walls.

How do I change the WiFi on my camhi camera?

Click the “setting”>>>>”Wifi setting”. Choose the wifi and input the password. And wait the camera connect to the wifi.

How do I change my WiFi blinking?

To start, tap on the gear icon in the bottom row of the app to enter Account Settings. Then tap on the name of your system under System Settings. Tap on Sync Module to see the status screen, and tap “Change Wi-Fi Network”.

What is IP camera activation password?

In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. … 0 and above before connecting to the network need to “activate” because they come from the factory without password (not active).

How do I reset my DVR admin password?

Reset Password of DVR/NVR by Scanning QR Code

  1. Tap More > Reset Device Password to enter the Reset Device Password page.
  2. Scan the QR code on the local GUI of the DVR or NVR. …
  3. Go to the device’s local GUI.
  4. Enter the received verification code on the Verify by Reserved Email window and then click OK to continue.
IT IS INTERESTING:  Frequent question: How do I mute my Jabra Bluetooth headset?
Wireless connection