What does it mean to configure WIFI?

By default, when your Wi-Fi network is configured and its access points are enabled, it broadcasts its SSID. That means that the network name appears in the list of available networks when anyone tries to connect a wireless device in your home or nearby. … The Wi-Fi network must be set to On to change the Wi-Fi password.

How do you configure WIFI?

How to Set Up Your Home Wi-Fi Network

  1. Find the best location for the wireless router. …
  2. Turn off the modem. …
  3. Connect the router to the modem. …
  4. Connect a laptop or computer to the router. …
  5. Power up the modem, router, and computer. …
  6. Go to the management web page for the router.

What is a WIFI configuration?

From a configuration standpoint, the Wi-Fi interface (e.g., wlan0) may be viewed as an extension of Ethernet. In addition to the TCP/IP and DHCP & NAT configuration tabs, it has the Wireless tab that allows for the configuration of wireless settings.

Do I need to configure my router?

You need to configure the router so that it can communicate with your network components. … You don’t need to adjust the firewall; most routers set things up just as you need them. Set a Service Set Identifier, or SSID, for your wireless network. This is the name by which the wireless network is known.

IT IS INTERESTING:  What is the password for Virgin Media WiFi?

What are the steps to configure a router?

Router setup steps

  1. Step 1: Decide where to place the router. …
  2. Step 2: Connect to the Internet. …
  3. Step 3: Configure the wireless router gateway. …
  4. Step 4: Connect gateway to router. …
  5. Step 5: Use app or web dashboard. …
  6. Step 6: Create a username and password. …
  7. Step 7: Update the router’s firmware. …
  8. Step 8: Create a Wi-Fi password.

How do I determine my router’s IP address?

Find your Router’s IP address on Android

Go to Settings > WLAN. Click the details icon. Then you could find your Router’s IP address show as Gateway.

How do you connect to WiFi at home?

How to Set Up a Home WiFi Network

  1. Get the right router. …
  2. Connect the router to the modem. …
  3. Connect the computer with Ethernet cable. …
  4. Install router software. …
  5. Open configuration page. …
  6. Enter the internet connection information. …
  7. Secure the router. …
  8. Set the wireless settings.

How do you set up WiFi without internet?

How to Setup a Home Network Without Internet

  1. Connect the wired devices to the router. Let’s tackle the wired devices first. …
  2. Login to the router. Following the same steps covered above, log in to your router and look for network settings. …
  3. Set the DHCP range. …
  4. Test a wired device. …
  5. Set the wireless SSID. …
  6. Test a wireless device.

How do I configure my router security?

How to set up Wi-Fi router securely: The specifics

  1. Update your router with new firmware and keep it up to date.
  2. Change your login credentials and router password.
  3. Always use WPA2 to secure your wireless network.
  4. Disable WPS.
  5. Schedule your wireless network’s online schedule.
  6. Get rid of any risky or unverified services.
IT IS INTERESTING:  How do you put Alexa in Bluetooth pairing mode?

How do I check my router configuration?

Type ipconfig in the command prompt and press Enter to run the command. Scroll through the information until you see a setting for Default Gateway under Ethernet adapter or Wireless LAN adapter. That’s your router, and the number next to it is your router’s IP address. Close the window when done.

How do I access my modem settings?

Access the modem’s configuration page.

Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-Link modem in the address bar: http://192.168.1.1. This should open the login page for your modem’s configuration pages.

Wireless connection