How do I install BT WIFI disk without app?
This is the process to pair them without the app.
- Plug one end of the Ethernet cable into one of the yellow ports at the back of the Smart 2 Hub.
- Plug the other end of the Ethernet cable into the yellow port at the back of the Wi-Fi Disc.
- The light on the Wi-Fi Disc will start flashing blue.
Do BT WIFI discs work with any hub?
Yes. Complete Wi-Fi will only work with a BT Smart Hub 2. But you can get a comparable service that works with other routers and with other providers’ broadband by opting for BT’s Whole Home Wi-Fi service instead.
How do I setup my BT wifi booster?
1 Plug in the extender halfway between your hub/router and the area you wish to extend wi-fi to. 2 Give the extender 20 seconds to boot up, then the range lights will scroll back and forth while it searches and connects to your router. After about 30 seconds, the flashing will stop and the signal quality will be shown.
How do I reset my bt full WIFI disc?
Factory reset the disc connected to your hub (router) – use a pin or paper clip to press the factory reset button on the rear of the disc for about one second. Wait for the LED to turn purple, flashing blue then solid blue. Turn off this disc. One by one turn on the other discs and factory reset them.
How does a BT WiFi disc work?
Wi-Fi Discs talk to your hub to create a single seamless network from basement to attic. Devices automatically connect to the hub or disc with the strongest signal, guaranteeing a flawless connection. You should get faster wi-fi too, and be able to stream HD content anywhere in your home.
Can you plug an Ethernet cable into a BT WiFi disc?
Only your first disc can be connected to the hub (router) using an Ethernet cable. … You can also use the Ethernet ports on these discs for devices such as TVs and printers.
Why is BT WIFI so bad?
The sluggish speeds are due to a weird glitch within the MyBT app and the BT.com website that means those checking download speeds – using a wired connection – are seeing dismally slow speeds. Understandably, this has left some believing the internet being pumped into their homes isn’t performing as well as it should.
Are BT routers any good?
In a nutshell, BT offers quality broadband. There’s a good spread of options, service is decent, and the included routers have top-notch tech. Though it costs a bit more than some of its rivals, it gives you value for your money.
Can I add BT complete WIFI?
The BT Complete Wi-Fi system consists of: A BT broadband contract – if you’re signing up to a new BT broadband contract, you can add BT Complete Wi-Fi for an additional £10 per month. A Smart Hub – this is the way that broadband gets into your home. It also produces the wifi signal.
Why is my BT WIFI disc flashing blue?
Blue (flashing every ½ second)
The disc is connecting to the network.
How do I connect my BT Homespot to my router?
1 Plug one end of the ethernet cable into a spare ethernet socket on your router/hub. 2 Plug the other end into the extender; it’s called ‘Broadband Extender’ on the front. IMPORTANT: to work properly, extender and hotspot must be plugged directly into the wall socket and not into extension leads.
How do I connect my wifi extender to my router?
1 Plug in the extender halfway between your hub/router and the area you wish to extend wi-fi to. 2 Give the extender 20 seconds to boot up, then the range lights will scroll up and down while it searches and connects to your router. After about 30 seconds, the flashing will stop and the signal quality will be shown.
Why is my BT disc not working?
Turn off the discs that are not directly connected to your hub (router) Factory reset the disc connected to your hub (router) – use a pin or paper clip to press the Factory reset button for about one second. … One by one, turn on the other discs and factory reset them. Wait for the blue flashing LED, then turn off.
How do I fix BT WiFi?
BT Broadband connection problems
- Check your service status.
- Make a call on your landline.
- Restart your BT Hub.
- Check the lights on your Hub.
- Power cycle your Openreach modem (fibre customers)
- Try your test socket.