Question: What is the IP address of ZTE pocket WiFi?

192.168. 1.1 – ZTE MF65 Router login and password.

How do I log into my ZTE pocket WiFi?

Open a browser and access the web management page via http://192.168.0.1 the default password is “admin”. Go to Settings > Network settings > Dial-up Settings > make sure to enable the Roaming Status. Then go to APN > Change Mode to Manual and enter the below.

How do I log into my ZTE router?

ZTE Router Login

  1. Connect router cable to your Laptop or Computer. Alternatively use your wireless network. …
  2. Open your web browser of choice and type IP address of your ZTE router in the address bar. …
  3. Now enter the default username and password of your router by accessing the admin panel.

What is the password of ZTE pocket WiFi?

Try different ID/password combinations that are widely used by ZTE that you’ll find below.

If above login credentials doesn’t work with your ZTE MF65M router then try this method.

# Username Password
1 admin admin
2 user user
3 (blank) admin
4 admin

What is ZTE username and password?

ZTE Router Login Guide

The default username for your ZTE router is admin. The default password is admin.

IT IS INTERESTING:  Is BT complete WIFI mesh?

How do I find my ZTE username and password?

The default credentials needed to login to your ZTE router. The majority of ZTE routers have a default username of admin, a default password of admin, and the default IP address of 192.168. 0.1. These ZTE credentials are needed when doing a login to the ZTE router’s web interface to change any settings.

How do I setup my ZTE WiFi router?

How to Setup ZTE MF91D 4G LTE Mobile Hotspot

  1. Insert the SIM card.
  2. Turn on the router by holding the On / Off button for several seconds.
  3. Click the wireless network icon on your computer.
  4. Select Connect to a network / List available networks.
  5. Click on your network (SSID), select Connect.

What IP address is?

An IP address is a unique address that identifies a device on the internet or a local network. IP stands for “Internet Protocol,” which is the set of rules governing the format of data sent via the internet or local network.

How do I login into my router?

Step 1: Swipe a finger down from the top to expand the Notification Shade and tap the Cog icon. Step 2: With the Settings panel open, tap Network & Internet. On Samsung phones, tap Connections instead. Step 3: Tap Wi-Fi.

What is the default username and password for Converge ZTE?

The default username for Converge Fiberx is user1 or user2. The default password is 12345 or user1234 or user12345.

How do I reset my ZTE pocket WIFI?

To reset the ZTE MF920V to its default settings, you have to do the following steps:

  1. Put router into operation.
  2. Press Reset button for at least 10 seconds.
  3. Restart of the device is automatically executed.
  4. Default settings have been restored.
IT IS INTERESTING:  Your question: How do I turn on WiFi calling on my Moto G stylus for Boost Mobile?
Wireless connection