How do I reset my Schlage sense WiFi adapter?

How do I connect Schlage sense to WiFi?

It’s easy to set up – plug it in within Bluetooth range of the lock (usually about 40 feet), and use the Schlage Sense app to connect the Adapter to your home Wi-Fi network. Then pair it with your lock.

How do I connect a Schlage lock to my phone?

To pair your Schlage Connect Smart Deadbolt with Samsung SmartThings, open the SmartThings app on your mobile device and tap on Home. Under Things, choose Add a Thing and follow the directions in the app. At the end of enrollment, a green light on your lock indicates success.

How long do Schlage sense batteries last?

The Schlage Touch is powered by a 9V battery and because it is a standard electronic lock, the battery life will last two years with a low-battery warning that will alert you long before the battery is completely drained.

Why is my Schlage Lock not working?

Check and Replace Batteries



As mentioned, your Schlage keypad lock may not function correctly if the batteries are weak. … If not, replace them with new batteries and ensure they’re properly placed. Do not mix old batteries with new ones, replace them all for the best performance.

IT IS INTERESTING:  How can I boost my indoor antenna signal?

How do I pair my Schlage sense lock with my Iphone?

How to set up your Schlage Sense Wi-Fi Adapter for iOS

  1. 1Navigate to the menu in the app and click Wi-Fi Adapters. …
  2. 3Type in the programming code located on the back of your Wi-Fi Adapter. …
  3. 5Follow instructions on the screen to join the Wi-Fi Adapter’s temporary network, then return to the app to finish the setup.

How do I change my 4 digit Schlage Lock code?

Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. Wait for the “Schlage” button to beep and flash three times. Enter a new four-digit code, and wait for the “Schlage” button to flash and beep three times. Re-enter the same four-digit code to confirm the change.

Does Schlage sense work without WiFi?

Schlage Sense WiFi Adapter



Then use the Schlage Home app to pair it with your deadbolt for access anywhere. *If you already have an iPad®/Apple TV® at home and connected to WiFi, the Schlage Sense WiFi Adapter is not necessary.

How do I find the code for my Schlage Lock?

For Schlage locks, the default programming code is located on a label on the programming guide which came with your lock. If the guide is not available, you can remove the lock from the door and find the default code printed on a label on the back of the lock.

How do you program a Schlage lock without the code?

So first how to Reset Schlage Keypad lock?

  1. Disconnect the batteries.
  2. Press and hold the Outside Schlage Button.
  3. While holding the Outside Schlage Button, Reconnect the batteries.
  4. Release the Outside Schlage Button.
  5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.
IT IS INTERESTING:  How do I turn off 5GHz on BT Smart Hub 2?

What if I lost my Schlage programming code?

If you lose or forget your Programming Code, you can restore the factory settings, which will restore the default Programming Code. See the instructions and video below. Locate the default Programming and User Codes on the User Guide (on the front or back of the guide) or on the back of the keypad assembly.

Wireless connection