How do I log into my Wavlink WiFi extender?

Visit http://wifi.wavlink.com or http://192.168.10.1 , select the language you want to use and then use admin for both username and password. Then click Log In.

How to setup the range extender via WPS button?

  1. Press the WPS button on your host router, then press the WPS button on the extender within 2 minutes.
  2. Wait until the Signal LED changes to solid blue, which indicates that the WPS connection is successful.

Wavlink Router Login Guide



The default username for your Wavlink router is admin. The default password is admin.

This issue may be caused by several factors, such as network security mismatch, wireless interference, wireless security mode mismatch, etc. … If you have forgotten or do not know the Wireless Network Name (SSID) and Password, please connect with router via Lan cable find wifi password in the setup page.

Forgot your Wavlink router password?

  1. When your Wavlink router is powered on, press and hold the reset button for 30 seconds.
  2. While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds.
IT IS INTERESTING:  Does taking out the SIM card delete everything?

Why is my Wi-Fi extender not connecting?

This kind of issue can occur if the extender does not have the latest firmware. Process: Make sure the extender is connected to the power adapter provided and into a live power outlet. Make sure the extender is within the Wi-Fi range of the wireless router and client device is connected to the extenders network.

How do I connect my Wi-Fi extender to a new router?

Within 60 seconds, press and hold the WPS button on your extender for 5 seconds. Wait for up to 5 minutes until the WPS indicator stop blinking. Check if the router link LED on your extender is ON or OFF. If the link LED is ON, your extender successfully connected to your router’s Wi-Fi network.

Visit http://wifi.wavlink.com or http://192.168.10.1 , select the language you want to use and then use admin for both username and password. Then click Log In.

1) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the AP/router. 2) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. 3. Visit http://wifi.wavlink.com or http://ap.setup and enter admin to login.

Find a Reset button/hole on the side of the Wavlink device and hold down it for about 8 seconds. During which time, you will find that all the indicators turn on or off and several of them will back off or on later. All of the customized settings of the Wavlink device will be erased after resetting.

IT IS INTERESTING:  Frequent question: Who makes the best Bluetooth motorcycle helmet?

What is the WPS button on my router?

Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. This information is provided to help connect your TV, Blu-ray Disc™ player, or other supported home video products to a wireless network using WPS.

How do I connect my WiFi extender to WPS?

How to configure my Range Extender via WPS button to extend an existing wireless network’s coverage?

  1. Plug your Range Extender into a power outlet near your main Router/AP.
  2. Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender. …
  3. The WPS process will last 2 minutes.
Wireless connection