Take the yellow wire and connect it to the gps (in) on the vhf and take the shield wire and connect it to the ground wire on the back of the vhf. Once you’ve done that, turn your lowrance on and hit menu, then system setup, then communication, then check nmea out.
How do I activate my VHF radio?
To use your VHF, turn it on and pick a channel, set the squelch to the point where you don’t hear any white noise, and begin talking. Things to remember when you are on the radio: Monitor channel 16 when you are not actively in conversation with someone else.
How do I program my VHF MMSI?
To enter the MMSI number, follow these instructions:
- Power ON the VHF Radio.
- Press the Menu button.
- Select DSC.
- Select My MMSI.
- For each number in the sequence, turn the channel knob clockwise to increase the number, and counter-clockwise to decrease the number. …
- Select Accept once the MMSI number has been entered correctly.
What VHF channel should I use?
Federal Communications Commission regulations require boaters having VHF radios to maintain a watch on either channel 9 or channel 16, whenever the radio is turned on and not communicating with another station. All non-emergency traffic should be communicated on another channel (not channels 9 or 16).
How far does VHF transmit?
Your VHF radio is intended mainly for short range communications, generally 5-10 miles, and at least 20 miles to a USCG station. To communicate at longer ranges, you will normally need a satellite telephone or an MF/HF marine radiotelephone.
Why is the height of a VHF radio antenna important?
When considering marine VHF radio communications, more important than all other factors is the height of your antenna. The higher you can place your VHF antenna the further you will be able to communicate. … Any angle beyond vertical will lessen the performance of your radio signal.
Do I need a Licence for a VHF radio?
Anyone who uses a Marine VHF Radio needs a licence. … If you need a radio, you may need both a radio licence and an operator’s licence. This depends on the type of radio you have and how you use it. Once installed in a vessel, a marine VHF radio requires a ship’s radio licence.
How do I transfer my MMSI number?
The best way to transfer to MMSI number is to have the previous owner cancel his license thus freeing up the MMSI for you.
Transferring Your MMSI from the Previous Owner
- Cancel online (this is recommended as the quickest and easiest)
- Cancel with FCC Form 605 mail-in.
- Write a letter to the FCC requesting cancellation.
Do MMSI numbers expire?
In order to be accepted into the ITU database, any FCC assigned MMSI must end in zero. This is why the BoatUS MMSI number cannot be re-used when later applying for an FCC MMSI number for international cruising.
What are NMEA 0183 devices?
NMEA 0183 is a combined electrical and data specification for communication between marine electronics such as echo sounder, sonars, anemometer, gyrocompass, autopilot, GPS receivers and many other types of instruments. It has been defined by, and is controlled by, the National Marine Electronics Association.