How do I activate my prepaid Japanese SIM card?

How do I activate my SIM card in Japan?

* For details on how to insert the SIM card, see the manual for your device.



Insert the SIM card into the device.

  1. Wear gloves and push the SIM card upward from the back.
  2. Pull out the pushed-up SIM card to remove it from the card completely.
  3. Turn your device off, insert the SIM card, and turn the power on again.

What number do you call to activate a SIM card?

If you wish to activate only Data services, dial 1800-890-1977 from any number. You can tele-verify your number using one of the following options: Enter 5 Digit PIN received on your alternate number OR. Enter last 4 digits of your aadhaar number OR.

How can I activate my SoftBank SIM?

1. How to Register a new account

  1. Insert Apple SIM card and tap “Settings” …
  2. Tap “Cellular Data” → “Set Up Cellular Data”
  3. Check that “Cellular carrier” and “Network status” at Status bar has changed to “ ”
  4. Tap “SoftBank”
  5. Tap “Set up a New Account”
IT IS INTERESTING:  You asked: Can a wireless dongle connect multiple devices?

How do I setup my SIM card?

It’s easy!

  1. Make sure your phone is off.
  2. Locate the small hole on the side of the phone. …
  3. Insert the tool provided or a paperclip into the hole, which releases the SIM tray.
  4. Take out the old SIM card and place the new one in the same way.
  5. Carefully push the tray back in.
  6. Turn on the phone.

Can you buy prepaid SIM cards in Japan?

Yes, it is possible to buy prepaid data-only SIM cards for your smartphones or devices in Japan.

How do I know if my SIM card is activated?

The best way to see if the SIM is active would be to insert it into a device which has a compatible SIM card slot. The good news is inserting any older SIM card into a phone will not harm the phone in any way or change any of the settings.

How long does it take for a prepaid SIM to activate?

The time for a SIM card’s activation can vary massively, depending on what the reason for the change is – most activations take between 15 minutes and four hours. If it’s still not working after this time, try to turn your phone off and on again. If it’s still not activated after that, try to re-insert the SIM.

How do I know if my Smart SIM is active?

Another way to inquire about your load balance and activate your Smart SIM at the same time is to call 1515. You will get an automated response, after which you will receive a text message with your balance information. If you also receive a text message welcoming you to the Smart network, then your SIM is activated.

IT IS INTERESTING:  How do you make a dual SIM phone not reachable?

What should I do if my idea SIM is not activated?

Activating Idea SIM

  1. First Insert the new Idea SIM into your phone.
  2. Then dial 59059 for tele-verification and activation of services.
  3. Your SIM should be activated within 4 hours.
  4. Then Dial 1925 and Follow it by “1” to Activate data services on your Idea SIM.

How do I activate my SIM card after porting?

How to activate Airtel SIM after porting?

  1. Insert your new SIM card into your handset and switch it on.
  2. Next, you will need to enter a PIN. …
  3. Simply enter this number and press OK.
  4. Now dial *123# to activate your SIM card.
  5. Once this process is done your connection will show ‘Airtel’ on the phone screen.

What is SoftBank SIM?

Mobile Accessory



“Prepaid SIM for Travel” is a prepaid data-only SIM service for foreign visitors in Japan. SIM size Multi, Data Service ONLY, 4G LTE & 3G. … Activation procedure requires mobile phone with camera and a photo to be uploaded of your original passport. Persons under 20 years of age may not apply.

Wireless connection