Frequent question: How do I fix my Dlink wireless router?

If Disconnected- please try the steps below: – Power Off your Internet Modem (Not the D-Link Router) for 20 seconds and then power it back on. Wait up to 2 minutes and check the Network Status again. If the status changes to Connected, your internet should be working.

Usually it’s or

  1. Type the username and password in the login page, the default username and password are both admin. …
  2. Select the diagnostic tool: Ping.
  3. Type the IP Address/Domain name of the PC/server you want to ping the IP Address/ Domain Name.
  4. Click Start to diagnose.

If your router is not performing properly (freezing, automatically rebooting, disconnecting…etc.), this could be happening for a number of reasons. … Firmware is the “brain” of the router, it is the programming that tells it how to work. D-Link will release new firmware versions when bugs are reported and fixed.

How do you know if your router is not working?

To test if your router is working, try to ping one computer using another computer in the same network. You should be able to do this if the router is working properly. Your computer’s firewall must be disabled as well.

IT IS INTERESTING:  How do I change my WiFi password on my computer?

Locate the “Reset” button on the D-Link router. The Reset button is in a tiny hole adjacent to the WAN or Internet port on most D-Link models. Insert the paperclip into the Reset hole to press the button. Press and hold the Reset button for 10 to 15 seconds.

Checking Data Usage on D-Link Router

  1. Go to your web browser.
  2. Type the IP address of the D-Link router and press enter.
  3. The D-link web page opens. …
  4. Click on the Advanced Tab at the top of the screen.
  5. Click on Traffic meter (or Bandwidth in some cases)
  6. Refresh the page.
  7. You will get the complete statistics on bandwidth.

Solid green A solid green light indicates an Internet connection. Blinking green A blinking green light indicates Internet activity. Solid red A solid red light indicates a PPP or DHCP failure.

D-Link has a range of Routers to meet your everyday needs for home and small business. Connect a Wireless Router to your existing Cable, NBN or DSL modem to create a secure wireless network to share your Internet connection with everyone in the home.

First thing to check is that your firmware is up to date. To update your firmware, make sure you are connected by wire to the router, because FW updates can reset factory defaults and that will drop your wireless connection.

IT IS INTERESTING:  Your question: What are the different types of Bluetooth?

Why does my router keep losing IP address?

If the IP address is missing, you’ve somehow lost your DHCP lease. If your router allows you to do a DHCP Release and Renew (buttons are usually somewhere on the Status page if you have the function), try that. … If your router has a keep-alive or auto-reconnect function (especially for DSL connections) try enabling it.

Wireless connection